Safety Instructions; General; Description Of Symbols - Asco joucomatic POSIMATIC 606 Série Manuel D'installation

INSTALLATION
1.

Safety instructions

Please read and observe the following safety precautions:

1.1 General

To ensure proper functioning of the positioner please provide for the following:
- Ensure proper transport and storage.
- Installation and start-up must be carried out by trained and qualified personnel only.
- The positioner must be operated in accordance with the instructions contained in this installation manual.
- Ensure proper maintenance and care.
Please follow:
- the instructions contained in this installation manual;
- all safety regulations related to the installation and operation of electrical equipment.
- This product must not be operated in potentially explosive atmospheres.
The regulations, standards and directives mentioned in this installation manual are applicable for the member states of the
European Union only. If the POSIMATIC positioner is used outside the European Union, please adhere to local rules and
regulations.

1.2 Description of symbols

Throughout this manual, the following symbols refer to important information:
Warning. Non-observance of the instructions contained in this manual may result in danger to life
!
and health and/or substantial damage to property.
Warning
Caution. Non-observance of the safety precautions marked by this symbol may cause slight personal
!
injury and/or damage to property.
i
Note. This symbol refers to important information on the POSIMATIC positioner.
This product complies with the essential requirements of the EMC-Directive 89/336/EEC and amendments. Certified CE. A
separate Declaration of Conformity is available on request.
A separate Declaration of Incorporation relating to EEC-Directive 89/392/EEC Annex II B is available on
request. Please provide acknowledgement number and serial numbers of products concerned.
POSIMATIC
3