Dimplex H 260E Instructions De Montage Et D'utilisation page 16

English
Specifying unlock code
Hold down the MENU and ADVANCE keys until the
rb display flashes.
Press or to select the BLOCKED symbol.
The symbol flashes.
Press the ENTER key. The number display flashes.
Press or to specify the number for the unlock
code. Confirm every position specified with the
ENTER key.
NOTE NOTE
If the specified lock code is not available, the block can
be cleared by entering the number 4115.
Unlocking keys
Press any button. The four-digit numerical code
0000 is displayed.
Press or to enter the number for the unlock
code. Confirm every position specified with the
ENTER key.
10.2 Reducing heat output, cold air mode
Model H 260E
The maximal heat output of 2 kW can be reduced to 1
kW. Alternatively, the device can be operated as a cold
air fan.
Model H 260E eco
The device can be alternatively operated as a cold air
fan.
Hold down the ADVANCE key until the HILO dis-
play appears.
Press or to select HI or LO or FAN. The dis-
play means:
HI = normal operation, full fan speed.
LO = fan speed reduction, heat reduction to 1 kW
on model H 260E.
FAN = cold air mode (no heat output).
Confirm selected setting with ENTER.
EN-7
10.3 Minimum room temperature
This function can be used to ensure that a minimum
room temperature is specified even during OFF times,
for example in timer mode (week program).
NOTE NOTE
The specification also applies to the runback timer
function. Frost protection mode has priority.
Hold down the MENU and ADVANCE keys until the
rb display flashes.
Press . The Sb display flashes.
Press the ENTER key. The ON symbol flashes.
Press the ENTER key. The minimum room temper-
ature (factory setting 16° C) flashes.
Use or to set the minimum room temperature
and confirm with ENTER.
Press the BACK key to return to the standard dis-
play.
1810/C
H 260E, H 260E eco
www.dimplex.de/en