Dimplex H 260E Instructions De Montage Et D'utilisation page 13

H 260E, H 260E eco
The time is saved and the display dAY flashes
briefly.
Use or to set the day.
Confirm every position specified with the ENTER
key. 1- 12 display flashes briefly.
Use or to set the month.
Confirm every position specified with the ENTER
key. YEAr display flashes briefly.
Use or to set the year.
Confirm every position specified with the ENTER
key. dSt (summer time) ON display flashes.
Recommendation: Confirm the ON display with the
ENTER key. This ensures the system will automat-
ically change to summer/winter time.
9. Operation
9.1 Standby mode (waiting position)
Hold down the BACK key until the display Eolt ap-
pears. The heating device is in standby mode.
To return to the previous operating status, briefly
press the BACK key.
9.2 Switching heating operation on/off
Switching heating operation on
Press the MAIN MENU key. The TIMER symbol
flashes.
Press or to select the required operating mode.
The symbol flashes.
Confirm with the ENTER key.
Switching heating operation off
Press the MAIN MENU key. The TIMER symbol
flashes.
Press or to select the OFF symbol. The OFF
symbol flashes.
Confirm with the ENTER key.
NOTE NOTE
Heating operation Off does not mean that the device is
completely disconnected from the power supply. To
disconnect the device from the electricity network,
please pull out the plug.
www.dimplex.de/en
9.3 Timer week program
The timer is pre-programmed at the factory. Four time
blocks, which can be adapted individually for each
weekday, are available per day.
To change these profiles, carry out the following steps:
Press the MENU key. The TIMER symbol flashes.
Press the ENTER key. The ON symbol flashes.
Press or
play flashes.
Press the ENTER key. The weekday flashes.
Use or
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
Press the ENTER key. P1 (Program 1) flashes.
Press the ENTER key. Switch-on time flashes.
Use or to set the hours and minutes. Confirm
every position specified with the ENTER key.
Room temperature flashes.
Use or
ENTER key. Switch-off time flashes.
Use or to set the hours and minutes. Confirm
every position specified with the ENTER key. P2
(Program 2) flashes.
The programs P2, P3 and P4 can be set in the
same way.
To copy the newly set programs P1 - P4 to other
days, hold down the ADVANCE key. COPY display
flashes briefly.
The day values selected are copied.
Press or
day flashes.
Hold down the ENTER key. PStE display flashes
briefly. The day values copied are assigned to the
new weekday.
Then press the MAIN MENU key.
1810/C
to select the EdIt display. EdIt dis-
to select the day.
5 = Friday
6 = Saturday
7 = Sunday
to set the temperature. Press the
to select a new weekday. The week-
English
EN-4