Danger Of Electric Shock - Vitalmaxx HM-001 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ATTENTION: Immediately stop your workout if you feel weak or dizzy. In the event
of nausea, pain in the chest or limbs, heart palpation or other symptoms, please
immediately contact a physician.
Never workout on a full stomach. Do not eat at least one hour before and after your
workout.
Do not workout if you already tired and exhausted.
Always remember that your body needs plenty of liquids when performing physical
activity. You should defi nitely satisfy the body's need for liquids.
We expressly point out that using the machine improperly or exercising too inten-
sively could be hazardous to your health.

Danger of Electric Shock

Use the device only in closed rooms.
The device should only be connected to a properly installed plug socket with safety
contacts. The plug socket must also be readily accessible after connection. The
mains voltage must match the technical data for the device (see the "Technical Data"
chapter). Only use suitable extension cables whose technical data is the same as
that of the device.
Never immerse the device in water or other liquids! Ensure that the device, cable
and plug do not fall into water or become wet. Should the device fall into water,
switch off the power supply immediately.
Never touch the device, the cable or the plug with wet hands.
Remove the mains plug from the plug socket if a fault occurs while the device is in
operation or when there is a thunderstorm.
When you want to remove the mains plug from the socket, always pull the plug and
never the cable.
Always check the device for damage before putting it into operation. If the device,
the cable or the plug shows visible signs of damage, the device must not be used.
Do not use the device if it has malfunctioned or been dropped.
Avoiding Damage to Material, Property and the Device
Read through the assembly instructions carefully before assembling the device. The
sequence of working steps described must be followed exactly.
Always place the device on a dry, even and fi rm surface.
Protect fl oor coverings on which the device is placed (both during set-up and during
use) with an underlay.
Each time before you start using the device, make sure that there is suffi cient clear-
ance around the device so that you cannot bump into walls, furniture etc. during use.
Do not expose the device to extreme temperatures, strong temperature fl uctuations,
direct sunlight or moisture.
Maintain a suffi cient distance from heat sources such as radiators, fi replaces or
ovens in order not to damage the device.
Position the cable in such a way that it does not become squashed or bent and does
not come into contact with hot surfaces.
Only use accessories supplied with the device by the manufacturer.
15
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Z 03011

Table des Matières