Sony digipad MHC-DP1000D Mode D'emploi page 27

5
Select the title, chapter, or track you
want to program.
x When programming a DVD
For example, select chapter "03" of title
"02".
Press v/V or the numeric buttons to select
"02" under "T", then press ENTER.
PROGRAM
3 : DVD
ALL CLEAR
1. – – – –
2. – – – –
3. – – – –
4. – – – –
5. – – – –
6. – – – –
Next, press v/V or the numeric buttons to
select "03" under "C", then press ENTER.
PROGRAM
– : – – – –
ALL CLEAR
1. DVD – 0 2 – 0 3
2. – – – –
3. – – – –
4. – – – –
5. – – – –
6. – – – –
Selected title and chapter
x When programming a VIDEO CD or
CD
For example, select track "02".
Press v/V or the numeric buttons to select
"02" under "T", then press ENTER.
Selected track
PROGRAM
– : – – – –
ALL CLEAR
1. CD – 02
2. – – – –
3. – – – –
4. – – – –
5. – – – –
6. – – – –
6
To program other discs, titles,
chapters, or tracks, repeat steps 3 to 5.
7
Press nN to start Program Play.
Program Play starts.
T C
ALL ALL
01 01
02
02
03
03
04
04
05
05
06
T
ALL
T
ALL
To Do this
Return to normal Press CLEAR during playback.
playback
Turn off the Program Press PLAY MODE when the
Display playback is stopped.
Change the program To change the disc, select the
program number you want to
change using v/V after step 2
or 5, then press ENTER.
To change the title, chapter, or
track, select the one you want
in step 5.
Cancel the To cancel all the titles,
programmed order chapters, or tracks in the
programed order, press v, and
select "ALL CLEAR" in step
3. To cancel the selected
program, select the program
using v/V in step 3, then press
CLEAR.
Tip
The program you made remains in the system's
memory even after it has been played back. Press
nN to play the same program again.
Notes
• The program is canceled when you change the
function to TUNER or turn the system off.
• You may not be able to do Program Play depending
on the DVD.
• You cannot make a program while playing a disc.
• When you switch the play mode to "PROGRAM"
while "REPEAT 1" is selected, "REPEAT 1" is
automatically canceled.
GB
27