Tape; Loading A Tape; Playing A Tape - Sony digipad MHC-DP1000D Mode D'emploi

Tape

Loading a tape

1
Press TAPE A/B repeatedly to select
deck A or B.
2
Press DECK A Z or DECK B Z.
3
Insert a tape in deck A or B.
Insert with the
side you want
to play/record
facing forward.

Playing a tape

You can use TYPE I (normal) or TYPE II
(CrO ) tapes. The deck automatically detects
2
the tape type.
1
Load a tape.
2
Press DIRECTION repeatedly to select
g to play one side, j to play both
sides, or RELAY* (Relay Play) to play
both decks in succession.
3
Press nN.
The tape starts playing.
Press nN again to play the reverse side.
When you select j or RELAY, the deck
stops automatically after repeating the
sequence 5 times.
MUSIC
DSP EDIT
GAME
* Relay Play always follow this cyclic sequence:
Deck A (front side) t Deck A (reverse side) t
Deck B (front side) t Deck B (reverse side)
GB
42
To
Stop playback
Pause playback
Fast-forward
Rewind
Tips
• You can use the digipad for tape operations.
• Pressing TAPE A/B while the power is off
automatically turns the power on.
• When you want to reduce the hiss noise in low-level
high-frequency signals, press DOLBY NR so that
"DOLBY NR" appears in the display.
• When a tape is inserted, corresponding presence
indicator lights up.
Searching for the beginning of a
track (AMS*)
During playback, press . or > repeatedly
for the number of songs you want to skip
forward (or backward).
The search direction, + (forward) or – (back),
and number of songs being skipped (1–9)
appear in the display.
* Automatic Music Sensor
Note
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
MOVIE – When the unit is placed near a television.
A B
TOOL
Tape presence
indicator
Do this
Press x.
Press X.
Press again to resume playback.
Press M while playing the front
side or press m while playing the
reverse side.
Press m while playing the front
side or press M while playing the
reverse side.
Example: searching forward 2 songs