INFOSEC UPS SYSTEM E7 One 1000 RT IEC Manuel Utilisateur page 64

Display
Backup time information
Configuration and fault information
Mute operation
Input, Battery and Output information
Load information
Programmable outlets information
Mode operation information
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
64
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 07 19 AA 59 203 14
Function
Indicates the estimated backup time.
H: hours, M: minute, S: second.
Indicates the configuration items, and the configuration items are listed
in details in section 3-5.
Indicates the warning and fault codes, and the codes are listed in
details in section 3-7 and 3-8.
Indicates that the UPS alarm is disabled.
Indicate the input voltage, input frequency, battery voltage, output
voltage and output frequency.
V: voltage, Hz: frequency
Indicates the load level by 0-24%, 25-49%, 50-74% and 75-100%.
Indicates overload.
Indicates the load or the UPS output is short circuited.
Indicates that programmable management outlets are working.
Indicates the UPS connects to the mains.
Indicates the battery is working.
Indicates charging status
Indicates the UPS is working in bypass mode.
Indicates the UPS is working in ECO mode.