AEG SRC 4306 CD Mode D'emploi page 33

Transport Safety Device, CD Compartment
Open the CD compartment (15) by pulling the lid upwards
by the tab (16). Before operating the machine for the fi rst
time, remove the transport safety device from the CD
player if it is still in place.
Setting of the Clock (24 h)
Turn the function selector switch (9) to the ON or OFF
position in order to set the time.
Hours: Press the CLOCK SET key (3) and the HOUR
key (2) simultaneously.
Minutes: Press the CLOCK SET key (3) and the MINU-
TE key (1) simultaneously.
Setting of the Alarm (24 h)
It is possible to set up to two alarm times as follows:
• Move the ALARM switch (8) to position "1". When the
ALARM SET button is pressed the word ALARM 1
appears in the display (14).
• Choose the desired alarm time with the select but-
tons.
Hours: Press the ALARM SET key (4) and the
HOUR key (2) simultaneously.
Minutes: Press the ALARM SET key (4) and the
MINUTE key (1) simultaneously.
• If the switch (9) is moved to AUTO the fi rst alarm time
becomes active. Press the ALARM SET button to see
the set time in the display (switch (8) to ALARM 1).
Setting the Second Alarm Time
• Move the ALARM switch (8) to position "2". When the
ALARM SET button is pressed the word ALARM 2
appears in the display.
• Choose the desired alarm time with the select but-
tons.
• Move the function selector switch (9) to AUTO to ac-
tivate the second alarm time. Press the ALARM SET
button to see the set time in the display (switch (8) to
ALARM 2).
• If the ALARM switch is moved to the "1+2" position
both alarm times are activated. Both ALARM 1 and
ALARM 2 appear in the display. This function is only
useful if the clock radio is switched off between the
two times with the button (7).
In order to switch off the alarm until the following day
please press the ALARM SLEEP/OFF button.
If you would like to deactivate the ALARM completely,
move the switch (9) to the OFF position.
Radio station tuning
• Move the function selector switch (9) to the ON positi-
on and the switch (11) to MW or FM.
• Select a station by turning the TUNING control (10).
The display shows the radio frequency and to the left
of this the radio band.
FM (MHz) = FM (frequency modulation),
MW (KHz) = medium wave.
• If reception is too weak and the station being received
hisses, try to improve reception by turning, unwinding
or winding up the throw-out antenna (23).
05-SRC 4306 AEG 33
• An aerial is integrated into the device for the reception
of AM stations. The machine can be aligned to the
station by turning it. In this frequency band programs
are transmitted in „mono" only.
• To switch off the radio, shift the function selector (9)
to the OFF position.
• The desired volume can be sent using the VOLUME
regulator (12).
• With the DIMMER button (22) you can select the
brightness of your display (2 levels).
Radio alarm
• After you have set the alarm time and chosen a radio
station, turn function selector switch (11) to MW or FM
and function selector switch (9) to the AUTO position.
• As soon as the alarm time is reached, the radio is
switched on. The selected radio station plays at the
set volume.
Buzzer alarm
• If you would not like to be woken up by the radio,
move the function selector switch (9) to the BUZZER
position.
• Instead of the radio, the buzzer goes off when the
alarm time is reached.
To turn off the alarm signal, move the function selector
switch (9) to the AUTO or OFF position or press the
ALARM SLEEP/OFF button (7).
Waking up to a CD
• In order to be woken up by an inserted CD, move the
function selector switch to the "CD" position. Ensure
that the CD is correctly inserted in the CD compart-
ment.
• As soon as the set alarm time is reached the CD
player switches on automatically. Playback is started
at the set volume.
Automatic Alarm Interval
The automatically set alarm function can be shut off for
approximately 7 minutes with the SNOOZE key (5). After
approximately 1 hour the alarm function switches off
completely until the following day.
Switch-off
The radio is switched off when the function selector
switch (9) is turned to the "OFF" position.
Delayed Shut-Off
The delayed switch-off function can be used when the
switch is in the positions AUTO or OFF.
• When the SLEEP button (6) is pressed the radio is
switched off after 59 minutes or 1 hour and 59 minu-
tes. SLEEP lights up in the display.
• The switch-off time can be adjusted by pressing the
SLEEP and the HOUR button (2) or the MINUTE
button (1) at the same time.
• This function can be cancelled with the ALARM
SLEEP/OFF key (7).
33
10.03.2005, 12:13:16 Uhr