Connections; Connecting The Speaker Cables - Technics SB-G90 Manuel D'utilisation

Connections

Connecting the speaker cables

The speakers are not supplied with speaker cables. For connection, use commercially-available speaker cables.
Speaker (rear)
1 Turn the knobs to loosen them, and 2 Tighten the knobs.
insert the core wires into the holes.
Do not insert the vinyl insulation.
+ (Red)
- (Black)
If it is difficult to connect the speaker cables, remove the knobs before connecting them.
≥ Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the amplifier.
DO NOT
16 (16)