Numark Mixstream Pro Guide D'utilisation Rapide page 8

Mix and Beat-Match Using Sync
Below is an example of how to mix tracks using the Sync function on Mixstream Pro:
1. Insert a USB drive or SD card with tracks into
the respective port on the rear panel. You can
also start with the demo tracks preloaded on
Mixstream Pro.
2. Start with the Level and EQ knobs on Mixstream
Pro at the 12 o'clock position. You can adjust
these after the tracks are loaded.
3. Press the Source button to view available sources including
connected media devices and streaming services. Tap to select
your desired source.
4. Press the View button to open Library view.
5. Turn the Browse knob to scroll through the selected music library.
6. Load tracks with similar BPM onto Decks 1 and 2 by pressing
the Load  and Load  buttons.
7. Move the crossfader on Mixstream Pro all the way to the left to
send the audio from Deck 1 to the main outputs and speakers.
8. Play the track that is loaded on Deck 1.
9. Raise the Channel Fader for Deck 1 so your audience can hear
the track.
8