Sangean RCR-1 Mode D'emploi page 7

Notes on safety
Only operate this appliance with a power supply of 220-230 Volt/
50-60 Hz. If you intend not using the appliance for a longer period of
time (eg. Holidays), pull the plug out of the mains socket to ensure a
complete separation from the power supply.
GB
Protect the appliance from heat and moisture.
Do not open the appliance and if it should require servicing, please
refer to a licensed electrical workshop.
Operation
Automatic station memory programming (ATS)
If the appliance is connected to the power supply for the first time or
if it has been separated from the power supply for a longer period of
time, the radio will automatically activate the analog clock and stop
at 12:00 then search through for stations (ATS), starting from FM
band then followed by MW band and LW band.
The ATS system seeks out in total 21 stations (7 FM, 7 MW and
7 LW ) with the best reception and memorizes in order of preset 1-7.
6