Technical Data - Sangean RCR-1 Mode D'emploi

Troubleshooting /RESET
If the radio fails to operate correctly or some digits on the display are
missing or incomplete, carry out the following procedures.
1. With the aid of a suitable implement (the end of a paper clip),
press the RESET button 11 for a few seconds, this will reset the
microprocessor, clock time and clear all the stations stored in
preset memory.

Technical data

Power supply
Performance
Frequency coverage
Technical data subject to changes without prior notice.
220-230 Volt/50-60 Hz
800 mW max.
FM 87.50 - 108 .0 MHz
MW 522 - 1629 kHz
LW 153 - 279 kHz
GB
16