Storage Function With Id; Allocate An Id To Pre-Tare Function; Allocate An Id To A Certain Reference Weight - KERN KFS-TM Notice D'utilisation Et D'installation

7.9 Storage function with ID

An ID between 00-99 can be allocated to the functions Pre-Tare and tolerance
weighing, as well as to the reference weight.
Only possible in non verifiable environment!
In the configuration menu (see chap. 12.5) Menu point F3 APP to „OFF"

7.9.1 Allocate an ID to Pre-Tare function:

 Use the numeric keypad to enter the Pre-Tare value, acknowledge by
 Press
for a long time, „00" is displayed
 Enter the ID number (00-99) with the numeric keypad and acknowledge by

7.9.2 Allocate an ID to a certain reference weight

 Enter the reference weight via the numeric keypad and acknowledge by
 Press
for a long time, in the display appears „00".
 Enter ID (00 – 99) via the numeric keypad and save with
Retrieve the stored reference weight:
•
Press repeatedly until „00" is displayed. Enter the stored ID via the
numeric keypad and acknowledge by
displayed.
Retrieve the stored ID:
•
Press repeatedly until „00" is displayed. Enter the required ID via the
numeric keypad and acknowledge by
respective reference weight is Retrieved.
KFS-TM-BA_IA-e-1613
. The stored reference weight is
. The respective function or the
.
.
41