Tolerance Check For Target Quantity - KERN KFS-TM Notice D'utilisation Et D'installation

7.8.1 Tolerance check for target quantity


Activate menu setting „
Set limit values
 Press
to display the lower limit including current setting.
If required, delete the current setting by pressing
 Use the numeric keys to enter the quantity for the lower limit (such as 70 units)
and confirm by pressing
The upper limit will be displayed with the current setting.
Delete with if necessary.
 Use the numeric keys to enter the quantity for the upper limit (such as 80 units)
and confirm by pressing
36
F0 sel
/ SEL 2", see chap.7.8 „Activate function".
.
.
.
KFS-TM-BA_IA-e-1613