Bosch PSE 150 Instructions D'emploi page 9

Spatulas ...
... suitable as a result of their elasticity for work on soft
or sensitive backgrounds (e.g. wood, plastic,
glass).
Possible applications are removal of paint residue, sil-
icon and plaster as well as stucco from glass and plas-
tic panels. Smoothing and removing of adhesive and
sealing residues from wooden flooring.
SP 100 C – 2 608 691 102
Steel, wide (100 mm), straight
SP 80 C – 2 608 691 100
Steel, wide (80 mm), straight
SP 60 C – 2 608 691 019
Steel, wide (60 mm), short
SP 60 CR – 2 608 691 064
Steel, wide (60 mm), half-round;
e.g.: Cleaning of concave surfaces (scaf-
fold pipes, shovels, boilers).
SP 40 C – 2 608 691 022
Steel, narrow (40 mm), long;
e.g.: Removing putty remains from re-
cessed areas.
Special Tool Inserts ...
... such as joint scraper, universal knife, holder for
Bosch replaceable blade and staple remover are in-
tended for specific applications.
SM 35 CS – 2 608 691 098
Universal knife, steel, narrow (35 mm), ex-
tra sharp;
Especially for removing putty from win-
dow joints or remains from door rabets:
SD 3 HM – 2 608 691 112
Joint scraper, hard metal, narrow (3 mm)
with tile protector of plastic;
e.g.: Removing of joint material from tile
joints.
2 609 932 209 • (03.08) T
SD 45 C – 2 608 691 104
Holder for Bosch replaceable blade
(45 mm);
e.g.: Stripping of paint and silicon remains
from sensitive surfaces such as tiles and
glass.
Bosch replaceable blade: 2 608 691 140
Wear protective gloves!
SD 8 C – 2 608 691 116
Staple remover, steel, narrow (8 mm);
e.g.: Removing of tacker staples and
deco nails from soft wood.
The staples are removed by the
stroke movement of the tool. Do not
pry!
Firmer Chisels ...
... are suitable for carving work, however, carving is
possible only in soft wood with short fibres (e.g. linden,
poplar).
SB 15 CF – 2 608 691 016
Steel (15 mm), flat
SB 18 CW – 2 608 691 066
Steel, angled/wide (18 mm), flat
SB 8 CW – 2 608 691 067
Steel, angled/narrow (8 mm), flat
SB 14 CR – 2 608 691 017
Steel, straight/wide (14 mm), half-round
SB 7 CR – 2 608 691 068
Steel, straight/narrow (7 mm), half-round
SB 14 CRK – 2 608 691 069
Steel, off-set/wide (14 mm), half-round
SB 13 CV – 2 608 691 018
Steel, straight (13 mm), V-form
SB 13 CVK – 2 608 691 070
Steel, off-set (13 mm), V-form
SB 15 C – 2 608 691 065
Steel, blank (15 mm), flat;
Blank for grinding one's own forms and
contours.
English–3