Installation Instructions - Ge 1G07 Instructions D’installation

INSTALLATION INSTRUCTIONS

SALTWATER COAST INSTALL
• The outdoor unit should be installed at least ½ mile away from the salt water, including seacoasts and
inland waterways. If the unit installed from ½ mile to 5 miles away from the salt water, including seacoasts
and inland waterways, please follow the installation instruction below.
• Install the outdoor unit in a place (such as near buildings etc.) where it can be protected from sea breeze
which can damage the outdoor unit.
Sea Breeze
Sea
• If you cannot avoid installing the outdoor unit by the seashore, construct
a protection wall around it to block the sea breeze.
• A protection wall should be constructed with a solid material to block the
sea breeze. The height and the width of the wall should be 1.5 times
larger than the size of the outdoor unit. Also, allow at least 28" (700mm)
between the protection wall and the outdoor unit for air circulation to
ventilate.
• Install the outdoor unit in a place where water can drain freely.
• If the above conditions cannot be met, contact GE Appliances for
assistance.
LOW AMBIENT INSTALL
- If the outdoor unit is installed in a region that is affected by strong wind or snow accumulation, it is
recommended to install wind baffle or/and top cover accessories. Corresponding top cover and wind baffle
model number can be found in product catalog. The installation instructions can be found in the manual
shipped with each accessory or on-line at GEAppliancesAirandWater.com.
14
ODU
ODU
Sea Breeze
Sea
Protection Walls
Sea Breeze
Sea
ODU
ODU
ODU
31-5001075 Rev. 0