Setup Regulations - Fronius Acctiva Smart 25 A Instructions De Service

Setup regulations

Danger from machines falling or toppling over.
This can result in serious injury and damage to property.
► Place the device on a solid, level surface so that it remains stable or set up on a level
► The "Installation" section is in the "Control elements and connections" chapter.
The device is tested to IP40 protection, meaning:
-
-
The device must be set up and operated in dry, closed areas that comply with degree of
protection IP40.
-
Dust:
-
-
Battery acid is corrosive and must be kept away from eyes, skin and clothes.
Ensure an adequate supply of fresh air during charging. Maintain a distance of
at least 0.5 m (19.69 in.) between the battery and charger during the charging
procedure.
Do not dispose of used devices with domestic waste. Dispose of them according
to the safety rules.
WARNING!
surface according to the "Installation" section.
Protection against penetration by solid foreign bodies with diameters exceeding 1.0
mm (0.04 in.)
No protection against water
Avoid direct wetting
Ensure that metallic dust is not sucked into the system by the fan,
e.g. during grinding work
53