Invacare 8153-J Manuel D'utilisation page 5

4 Usage
4.1 Leg Height Adjustment
1. Loosen the leg collar (8153 models only).
2. Depress the snap button.
3. Slide the leg up or down until the desired
height adjustment is achieved. The handgrip
should normally be positioned at wrist
height. Consult a therapist for height
adjustment information.
4. Tighten the leg collar (8153 models only).
WARNING
Ensure that the snap buttons fully
protrude through the height
adjustment hole, otherwise injury or
damage may occur. An audible
"click" will be heard when the snap
buttons engage in the height
adjustment holes.
4.2 Cuff Height Adjustment
 This procedure applies to models
8153-J, 8153-A and 8153-T only.
1. Loosen the cuff collar.
2. Depress the snap button.
3. Slide the cuff up or down until the desired
height adjustment is achieved. The handgrip
should normally be positioned at wrist
height. Consult a therapist for height
adjustment information.
4. Tighten the cuff collar.
WARNING
Ensure that the snap button fully
protrudes through the height
adjustment hole, otherwise injury
or damage may occur. An audible
"click" will be heard when the snap
button engages in the height
adjustment hole.
Part No 1164937
Cuff
Arm Height
Adjustment Holes
Handgrip
Snap Button
 Models 8153-J, 8153-A and 8153-T
shown.
5
Cuff Collar
Snap Button
Leg Height
Adjustment Holes
Leg Collar
Leg
Rubber Crutch Tip
Elbow Crutches