Display (Fig. B) - Parkside 100374640 Instructions D’utilisation

AUTO
stored value 3:
Amount of water per watering.
The watering process can be inter-
rupted for up to 3 seconds.
The display starts again from zero.
LITER/MIN or GAL/MIN
Current water flow in
l/min or gal/min
Note: The product switches to
standby mode if no button has
been pressed for more than one
minute or if no water has flowed.
Reset values
1. Select the mode for which you
want to reset the stored value:
TOTAL 1, TOTAL 2 or AUTO.
2. Press the RESET button for
approx. 3 seconds.
3. The value for the displayed
mode is set to zero.

Display (Fig. B)

1c Water flow in GAL
(gallons)
1d Water flow in LITRES
1e Water flow in
GAL/MIN or LITRES/MIN
1f Active measurement
1g Battery indicator
1h Stored value TOTAL 1 /
TOTAL 2 / AUTO
1i Numeric value
GB/IE 27