Hach H160 Manuel D'utilisation page 9

Figure 4 Keypad descriptions
Key Action
ON/OFF: Set the power to on or off.
pH mode
mV mode
Set the backlight to on. After 2 minutes without a keystroke, the backlight is set to
off.
TDS mode
Conductivity mode
Salinity mode
Hold mode: Operates only in measurement modes. All readings freeze when hold
mode is set to on.
Calibration mode
Scroll through values, setup screens and options.
Setup mode
Select an option, setting or value.
Table 1 Keypad functions
H160 H170
x x
x x
x x
x x
x
x
x
x x
x x
x x
x x
x x
English 9