Operating The Controls; For Best Results - Faber Stilo Glass Instructions D’installation

OPERATING THE CONTROLS

FOR BEST RESULTS

Start the Range Hood several minutes before cooking to develop proper
airflow. Allow the Range Hood to operate for several minutes after cooking
is complete to clear all smoke and odors from the kitchen.
B - SPEED 1
A - POWER
BUTTON
A - POWER - A quick press turns the motor off.
B - SPEED 1 - A quick press turns the motor on at
speed one.
Reset Grease Filter and / or Charcoal Filter
Alarm - A long press with the motor and lights
off to reset the filter wash alarms.
C - SPEED 2 - A quick press turns the motor on at
speed two.
Activate / Deactivate charcoal filter alarm - A
long press with the lights on and motor off will
activate or deactivate the charcoal alarm.
D - SPEED 3 - A quick press turns the motor on
at speed three.
E - INTENSIVE - A quick press will operate
intensive speed for 6 minutes.
At the end of the 6 minutes the hood returns to
the speed that was set before. If intensive is set
with the motor turned off, the hood will turn off
after 6 minutes.
F - DELAY - Activate / Deactivate the Delay
function: A Long press with the motor On and
lights Off: (The motor and lights will shut off
after 15 minutes).
G - LIGHT - Light button: On/Off switch for the
lights.
D - SPEED 3
C - SPEED 2
FUNCTION
F - DELAY
E - INTENSIVE
-
All LED's flash 3 times.
All LED's flash twice (alarm
activated).
All LED's lit (alarm deactivated).
Off.
H - WI-FI
G - LIGHT
INDICATOR
+
+
+
-
On until the hood switch
27