Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GLISSANDO®/ Softform® PREMIER™/ Softform® EXCEL™/ ESSENTIAL®
IMPORTANT!
1% Chlorine Solution used on a regular basis can diminish
the life of the cover if not rinsed and dried properly.
– Do not use granules.
WARNING!
– Remove contaminated foams from use.
CAUTION!
– Keep clear of open heat sources.
IMPORTANT!
– Do not use phenols, alcohols, bleaches, or other
abrasive materials.
Replacing covers
1.
Unzip the cover and remove it carefully from the foam core.
2.
Place new cover onto the foam core.
3.
Then close the zipper.
IMPORTANT!
– Ensure that the corners of the foam core are
positioned correctly into the corners of the cover.
– Ensure that the profiled side of the foam is facing
uppermost when packed into its cover.
8.3 Cleaning Raised Side Rail Covers
1.
Unzip the Raised Side Rail Cover of the mattress and remove it
carefully from the mattress foam core.
2.
Open the four zippers underneath the integrated bolsters on
the bottom of the RSR Cover.
20
3.
Remove all four foam bolsters and store them in a dry and safe
place.
4.
Launder the RSR Cover in the washing machine at 176 °F / 80 °C.
IMPORTANT!
– Washing at higher temperatures may cause shrinkage.
5.
Hang mattress covers from a line or bar and drip dry in a clean
indoor environment.
or
Tumble dry on a low heat setting.
IMPORTANT!
– Tumble dry setting must not exceed 104 °F / 40 °C.
– Do not tumble dry for longer than 10 minutes.
– Dry covers thoroughly before re-fitting to the
mattress.
6.
Insert all four foam bolsters into the RSR cover.
7.
Close all four zippers underneath the integrated bolsters.
8.
Place the RSR cover onto the foam core of the mattress.
IMPORTANT!
– Ensure that the corners of the foam core are
positioned correctly into the corners of the RSR
cover.
9.
Close the zippers of the RSR cover.
Disinfecting Raised Side Rail Covers
1.
Follow section "Disinfecting covers" in chapter 8.2 Cleaning and
Care, page 18.
1185740-A
Publicité
Chapitres
Table des Matières
