Problem
It is not possible to
The option you tried to select is not availa‐
select an option. An
ble for the selected program.
acoustic signal is
emitted.
There is no drum
Defective drum lamp.
light
Unexpected duration
The drying duration is calculated according
time appears on the
to load size and dampness.
display.
The water container is full.
A program is inac‐
tive.
The load size is small.
The drying cycle is
too short.
The laundry is too dry.
The filter is clogged.
The load is too large.
The laundry was not spun sufficiently.
Drying cycle too
5)
long
Too low or too high room temperature - this
is not the appliance malfunction.
All buttons are inactive, except the Start/
Pause.
The display shows:
.
The wireless home network does not work.
No wireless connec‐
tion or connection of‐
ten brakes off.
The smart device or the appliance or both
are not paired with the wireless network.
Poor or missing connection between the
The connection with
tumble dryer and router.
the appliance
through our app
does not work fre‐
quently.
1)
Follow the program description — see the PROGRAMS chapter .
2)
See the
CARE AND CLEANING chapter.
3)
Only dryers with the Dryness Level option.
4)
See the HINTS AND TIPS chapter .
5)
Note: After a maximum of 6 hours the drying cycle ends automatically.
66
ENGLISH
Possible cause
Remedy
Turn the tumble dryer off and on. Change
the program or option as required.
Contact the service centre to replace the
drum lamp.
This is automated - the appliance is working
correctly.
Drain the water container, push the Start/
2)
Pause button.
Select a time program. The time value must
be related to the load. To dry one item or a
small amount of laundry we recommend
short drying times.
Select an appropriate time program or a
higher dryness level (e.g.
Clean the filter.
Do not exceed the maximum load size.
Spin the laundry well in the washing ma‐
chine.
Ensure a room temperature higher than
+5°C and lower than +35°C. Optimal room
temperature to achieve best drying results
is between 18°-25°C.
The appliance downloads the APP updates.
Wait until the update process is complete. If
you deactivate the appliance during update,
it resumes when you activate the appliance
again.
Check wireless home network configuration.
Restart the router. If problem still exists con‐
tact your wireless service provider.
Repeat connection configuration steps on
smart device or the appliance or both.
Assure proper connection between the ap‐
pliance and the home router. Move the rout‐
er closer to the appliance. Equip your home
network with wireless range extender.
Do not use at the same time microwave
oven and remote control. The microwave
oven can disrupt the connection signal.
extra dry )