Cleaning The Filter - Aeg Tr89T64C Manuel D'utilisation

Cleaning the humidity sensor
Cleaning the drum
Cleaning the control panel and housing
Cleaning the airflow slots
The following paragraphs explain how you should clean each part.
13.2 Removing the foreign items
Make sure that the pockets are empty
and all loose elements are tied up before
running the drying cycle. Refer to the
"Preparing the laundry" section.
Remove any foreign items that you may find
in the drum after the drying cycle (e.g. metal
clips, buttons, coins, etc).

13.3 Cleaning the filter

At the end of each cycle the
comes on the display and you must clean the
filter.
The filter collects the lint during the
drying cycle.
To achieve the best drying performance
clean the filter regularly. The clogged
filter causes the longer drying cycle and
as a consequence the energy
consumption increase.
Clean the filter by hand. Use a vacuum
cleaner if necessary.
CAUTION!
When cleaning the filters, the lint should
be thrown in the garbage bin and not
washed through the drain in order to
avoid spreading microplastics in the used
water system.
1. Open the door. Pull the filter up.
At least 3 or 4 times a year
Every two months
Every two months
Every two months
2. Push the hook to open the filter.
Filter symbol
3. Gather lint with hand from both internal
parts of the filter.
ENGLISH 61