Bosch YOU Série Notice Originale page 21

Charge
in the vacuum cleaner (in mo-
5%−0%
Note: If the battery (3) has been stored away and not been used for a long period of
time, it is possible that the battery charge indicator (4) will not activate. This protects
the battery (3) from deep discharge. Once the battery (3) is charged, the indicator will
activate again. In this case, the charging time will increase.
The battery charge indicator (4) goes out a few minutes after the battery (3) has been
fully charged.
Note: If the battery charge indicator (4) is flashing white, the temperature is outside the
permitted ambient temperature range. The charging process begins automatically once
the permitted temperature range has been reached again. The battery charge indicator
(4) will flash green during the charging process.
Fitting the Vacuuming Accessories
The vacuum cleaner accessories can be directly connected with the dust container (8).
– Insert the individual vacuum cleaner accessories firmly into the connection on the
dust container (8) and into one another.
Operation
Remove the battery before cleaning or performing maintenance on the dust ex-
u
tractor, making tool adjustments, changing accessories or placing the dust ex-
tractor in storage. This safety measure prevents the dust extractor from being star-
ted accidentally.
Ensure that the flap of the USB Type-C
u
prevent dust from getting in.
Start-up
Before extraction, ensure that the filter unit is securely fitted.
u
Do not use damaged filters (e.g. no cracks, small holes, etc.). Replace any dam-
u
aged filters immediately.
Switching on/off
– To switch on the vacuum cleaner, press the on/off button (2).
Bosch Power Tools
Battery separate or
tion)
Red
(flashing)
TM
port (6) is closed during operation. This will
English | 21
Charging process
(battery with connected power
adaptor)
Green
(flashing)
1 609 92A 4G2 | (19.12.2018)