Tesla RB5210FHXE Mode D'emploi page 9

INSTALLATION
Remove the doors
Tool required: Philips screwdriver, Flat bladed screwdriver.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It's better that 2 people handle the unit during assembly.
1
Unscrew hinge cover by Philips screwdriver.
2
Disconnect the harness.
3
Unscrew top hinge.
4
Lift the door and place it on a soft pad. Then
remove another door as same process.
5
Unscrew bottom hinges.
6
After the appliance is positioned! install the
doors as reversed process.
9
ENG