LaserLiner PowerLine-Laser G360P Multi-18V Mode D'emploi page 16

2
Operation with power supply unit
– The device may be operated only with
a standard commercial USB-C power cable
and a standard USB power supply unit
(5V / > = 1000mA). Using any other power
pack/charger will invalidate the warranty.
– Use the power supply/charger unit only in
closed rooms; do not expose to moisture
or rain otherwise risk of electric shock.
3
Horizontal and vertical levelling
Release the transport restraint, push the slide switch (2) to the right.
The laser cross will appear. The laser lines can be switched individually
with the selection button.
LASER
The transport restraint must be released for horizontal and vertical lev-
!
elling. The laser lines flash as soon as the device is outside the
automatic levelling range of 3.5°. Position the device such that it is
within the levelling range. The laser lines stop flashing (steady light).
16
EN
LASER LASER LASER LASER
USB-C
LASER