Inspecting And Replacing Anode(S) - Yamaha Z150P Manuel D'utilisation

5) With the outboard motor in an verti-
cal position, using a flexible or pres-
surized filling device, inject the gear
oil into the oil drain plug hole.
Gear oil grade/capacity:
Refer to SPECIFICATIONS on page 4-1.
6) When the oil begins to flow out of the
oil level plug hole, insert and tighten
601033
the oil level plug.
7) Insert and tighten the oil drain plug.
EMU00831
INSPECTING AND REPLACING
ANODE(S)
Yamaha outboard motor is protected
from corrosion by a sacrificial anode(s).
Check the anode(s) periodically. Remove
the scales from surfaces of the anode(s).
For the inspection and replacement of the
anode(s), consult a Yamaha dealer.
603024
cC
Do not paint the anode(s), for this would
render it ineffective.
405022
4-25
GB