Storing Outboard Motor - Yamaha Z150P Manuel D'utilisation

q
cC
Do not use the tilt support lever/knob
when trailering the boat. The outboard
motor could shake loose from the tilt
support and fall. If the motor can not be
trailered in the down position, use an
additional support device to secure it in
the up position.
EMU01187

STORING OUTBOARD MOTOR

When storing your Yamaha outboard for
prolonged periods of time, (2 months or
longer), several important procedures
must be performed to prevent expensive
damage. This is especially important for
your Yamaha
equipped outboard due to the lean oil
ratios used at idle prior to shutting the
engine off for the season.
It is advisable to have your outboard ser-
viced by an authorized Yamaha dealer
prior to storage. However, the following
procedures can be performed by you, the
owner, with a minimum of tools.
cC
8 Do not use any chemical goods con-
taining Silicon, Phosphorus or Lead.
Otherwise, the oxygen sensor for Elec-
tronic Fuel Injection system could be
damaged. For the detail, consult your
Yamaha dealer to use chemical goods
for storage.
8 Drain the remaining gasoline from the
vapor separator. Gasoline left in the
vapor separator
od of time will break down and possi-
bly cause damage to the fuel line.
000100
4-6
GB
oil injection system-
1 for a prolonged peri-