Delta R2707 Mode D'emploi page 6

E.
F.
Make sure end valves are properly aligned (1). Carefully bend corrugated
E.
outlet tubes (2) and insert into tee (3). Connect tee to spout adapter (4).
Connect inlet tubes (5) to water supplies. Be careful bending the
copper tubes. Kinked tubes-will void warranty.
Solder connections.
F.
1
2
G.
Turn on water supplies and check for leaks. You are now ready for the trim
G.
kit. Please see the trim installation instructions.
6
40291 Rev. A