Hazet 4903/4 Mode D'emploi page 29

4
INFORMATION: The brakes might slightly lift off from the universal clamping disc,
The Clamping Disc must not be used if the rubberised surface is damaged or
missing.
3 Design and function
this is normal
6.
If the diameters of the end windings are
very small it may not be possible to hold
the spring with the brakes. In this case,
shift the brakes into the front guide groove
by loosening screw
the necessary grip. Please also ensure that
the brakes are positioned opposite to one
another.
in order to ensure
4
29