Controls And Functions - Wagner Cs150M Manuel D'utilisation

COMPONENTS AND ASSEMBLY
GB
Components
•
Spray gun with filter
•
Spray tip assembly
•
7.5 mtr. long
Tools needed for assembly
•
Two adjustable wrenches.
WARNING
Do not plug in the unit until setup is complete.
Hopper lid
Return tube
Hopper
Outlet valve
Tip guard
Tip
(311 and 515)
Assembly
1
Place the spray gun against the tapered end of the hose
and twist the gun onto the hose. Firmly tighten the
thread using a wrench
24
Tip storage
PRIME/SPRAY knob
Spray gun
Trigger lock
Filter (white)
preassembled
Trigger
in gun
Twist the thread at the other end of the hose onto the hose
connection. Using a wrench, hold the hose connection firmly and
tighten the hose with another wrench.

Controls and functions

ON/OFF switch
Spray Gun
Spray Hose
Return Tube
PRIME/SPRAY knob
Inlet lter
(inside of hopper)
Handle
Motor
housing
ON/OFF
switch
Filter (red)
2
Control 150 M
The ON/OFF switch turns the unit
on and off (O = OFF, l = ON)
The spray gun controls the
delivery of the fluid being
pumped.
The spray hose connects the gun
to the pump.
Fluid is sent back out through the
return tube to the hopper when
priming.
The PRIME/SPRAY knob directs
fluid to the spray hose when set
to SPRAY, or the return tube when
set to PRIME.
ON/OFF Switch
PRIME/SPRAY
knob
PRIME
Position
Spray hose
SPRAY
Position
= ON
= OFF