4.1.
Device description
Figure 1: The overview of model
4.2.
Preparing for use
4.2.1.
Appliance location
The temperature of environment must not be higher than 40°C and the relative humidity should
be less than 85%. Ensure good ventilation in the room in which the device is used. The distance
between each side of the device and the wall or other objects should be at least 10 cm. Keep the
device away from hot surfaces. Operate the device on flat, stable, clean, refractory and dry
surfaces out of the reach of children and people with mental disabilities. Install the device
making sure that constant access to the main plug is ensured. The power cord connected to the
EN
Figure 2: The overview of model
1)
Thermostat
2)
POWER - power light
3)
HEAT - thermostat light
4)
RESET - overheating warning light
5)
Drain
6)
Collection drawer
7)
Power supply cord
8)
RESET button
9)
Grill plate