Next Level Racing ES1 HAPTIC Manuel D'instructions page 25

3. Switch to Sound Capture Mode by pressing and holding the button on the controller for
5 seconds. The LED will turn white while holding the button. A flashing light indicates
Sound Capture Mode.
5 Sec
7.5 Adjusting Vibration Intensity
To adjust the vibration level, rotate the intensity knob on the controller.
Red LED = Highest intensity; Green LED = Lowest intensity.
Low
NOTE:
The seat will remember and start in the last-used mode and vibration intensity on next power-up.
PLEASE NOTE:
Seat Haptic Vibrations will be inactive in Sound Capture Mode, until audio is played.
For questions, information, technical assistance, please contact our team at
support@nextlevelracing.com
HOLD
High
25
INTENSITY