Next Level Racing ES1 HAPTIC Manuel D'instructions page 24

3. When prompted, enter your product serial number to download the software
Rear of The Seat
Serial
Number
4. Switch to PC Mode by pressing and holding the button on the controller for 5 seconds.
The LED will turn white while holding the button. A solid light indicates PC mode.
5 Sec
5. Use the HFS software to control vibration and fine-tune
each haptic zone. The software supports a range of compatible games.
Option 2: Sound Capture Mode (3.5mm Audio)
1. Connect the 3.5mm male audio cable from the seat to the
headphone jack on your audio source.
2. (Optional) Plug your headphones into the headphone pass-through
port on the seat.
HOLD
24