VEVOR CY-24 Mode D'emploi page 14

② Keep the bottom exhaust pipe at a distance of 2 inches from the ground, and
prevent fires if the exhaust pipe temperature is high;
③ Do not bend the exhaust pipe excessively, as it may cause uneven exhaust
flow;
④ The air outlet duct shouldn't be too long and multiple bends can cause heat not
to be discharged, resulting in a high-temperature fault;
⑤ When refueling the fuel tank, do not flow onto the casing, as it will flow along
the inside of the machine to the exhaust pipe position, causing smoke. Fill the oil
level close to the fuel tank port；
⑥Do not block the intake pipe, which will cause insufficient oxygen, and the
heater will not work；
Installation location precautions - schematic diagram
2. Precautions for the power supply:
※ The power supply for the diesel heater must meet the following requirements:
Voltage: 12V; Current: ≥20A, either from a direct power source or a battery. When
powered by a battery, do not charge the battery while using the heater as
insufficient current can cause malfunction. Ensure a firm and secure connection
to the battery. Using clamps for fixation can result in poor contact.
- 14 -