Specific Safety Rules; Functional Description - Milwaukee 561-21 Manuel De L'utilisateur

SPECIFIC SAFETY
RULES
Read instructions carefully.
Use:
Do not use these heated gloves with an infant,
child, a helpless person, or anyone insensitive to
heat, such as a person with poor blood circulation.
• If you have a medical condition making you sen-
sitive to overheating, or you use any personal
medical devices, consult the devise manufacturer
and/or your physician to determine if use of this
product is appropriate.
• Never use if inner liner is wet.
• Heating elements are not recommended to touch
bare skin.
• Shut off power immediately if discomfort occurs.
• Do not allow the cords to be pinched.
• If improper operation of the heated gloves is
observed, discontinue its use immediately and
contact a MILWAUKEE service facility for repair.
• Do not use pins. They may damage the electric wiring.
Care:
• Disconnect and remove battery pack and char-
ger/controller from pocket before washing.
• Push the power cord completely into the char-
ger/controller pocket and zip closed.
• Follow Care Instructions on heated glove tags.
Spot clean only. Hang dry. Do not machine wash
or dry.
• Do not bleach.
• Do not iron.
• Do not wring or twist.
• Do not dry clean. Do not use dry-cleaning fluid on
the heated gloves. Do not bleach. Cleaning solvents
may have a deteriorating effect on the insulation of
the heating element.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
READ AND SAVE
ALL INSTRUCTIONS
FOR FUTURE
REFERENCE
SPECIFICATIONS
Charger/Controller Cat. No. .............. 48-59-2005
Input Volts ....................................................... 5 DC
Input Amps.............................................. 0.1 - 2.1 A
Output Volts .................................................... 4 DC
REDLITHIUM USB Batteries
®
Volts ................................................................ 4 DC
Operating Temperature
Battery and Charger .40°F to 104°F (4°C to 40°C)
Battery and Tool ...... 0°F to 149°F (-18°C to 65°C)
Power Supply Cat. No. .........................44-66-1202
Wall Plug Input Volts ....................................120 AC
Dual Cable Cat. No. ............................ 42-44-1205
SYMBOLOGY
Volts
Direct Current
Amps
Read Operators Manual
Smartswipe
Properly Recycle Batteries
BFP
Backfeed Protected
California Energy Commission
FUNCTIONAL
DESCRIPTION
1
8
7
6
4
5
1. Smartswipe index
TM
finger
2. Charger/controller
pocket
3. Power button
High: Red LED
Medium: White LED
Low: Blue LED
3
Index Finger
TM
2
4. Power cable
5. Power cable port
6. Charger/controller
7. Cap
8. Micro USB port
3