Milwaukee 561-21 Manuel De L'utilisateur page 5

OPERATION
Unzip the pocket and pull out the power cable. Plug
the power cable into the port on the end of the char-
ger/controller. Tuck the charger/controller into the
pocket and zip closed. Repeat for the second glove.
To turn on, press and hold the heated glove power
button (1 to 2 seconds) on each glove. The heated
glove will be turned to High and the red LED will light.
Temperature setting can be adjusted at any time by
pressing the heated gloves power button. Each press
will cycle through the heated glove's temperature
settings. Adjust each glove separately.
To turn off the heated gloves, press and hold the
heated glove power button until the LED turns off
(1 to 2 seconds).
If the heated gloves turns off unexpectedly, check
connections and charge the battery pack.
CARE
To reduce the risk of injury, always
WARNING
unplug the charger and remove the
battery pack and charger/controller from the
heated gloves before performing any mainte-
nance. Never disassemble the heated gloves,
battery pack or charger. Contact a MILWAUKEE
service facility for ALL repairs.
If the heated gloves does not start or operate properly
with a fully charged battery pack, clean the contacts
on the battery pack. If the heated gloves still does
not work properly, return the heated gloves, charger
and battery pack, to a MILWAUKEE service facility
for repairs.
To reduce the risk of personal in-
WARNING
jury and damage, disconnect and
remove battery pack and charger/controller from
pocket before washing. Never immerse your
charger/controller, battery pack, or charger in
liquid or allow a liquid to flow inside them.
To clean the heated gloves:
1. Remove battery pack and charger/controller.
2. Push the power cord completely into the charger/
controller pocket and zip closed.
3. Spot wash. Do not machine wash. Do not use
bleach. Do not dry clean. Do not wring or twist.
4. Hang dry. Do not machine dry. Do not iron.
SERVICE - UNITED STATES
1-800-SAWDUST
Monday-Friday, 7:00 AM - 6:30 PM CST
www.milwaukeetool.com
or visit
Contact Corporate After Sales Service Technical
Support with technical, service/repair, or warranty
questions.
Email: metproductsupport@milwaukeetool.com
B e c o m e a H e a v y D u t y C l u b M e m b e r a t
www.milwaukeetool.com to receive important
notifications regarding your tool purchases.
Every MILWAUKEE HEATED GEAR product (including its battery
holder/controller) is warranted to the original purchaser only to be
free from defects in material and workmanship. Subject to certain
exceptions, MILWAUKEE will repair or replace any part on a Heated
Gear product which, after examination, is determined by MILWAUKEE
to be defective in material or workmanship for a period of one (1)
year* after the date of purchase. Return of a Heated Gear product to
a MILWAUKEE factory Service Center location, freight prepaid and
insured, is required. A copy of the proof of purchase should be included
with the return product. This warranty does not apply to damage that
MILWAUKEE determines to be from repairs made or attempted by
anyone other than MILWAUKEE personnel, misuse, alterations, abuse,
normal wear and tear, or accidents.
*This warranty does not cover a M12™ LITHIUM-ION Battery Pack, a
M12™ Charger, or a REDLITHIUM™ USB battery; there are separate
and distinct warranties available for these products.
Warranty Registration is not necessary to obtain the applicable
warranty on MILWAUKEE Heated Gear products. The manufacturing
date of the product will be used to determine the warranty period if no
proof of purchase is provided at the time warranty service is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT
REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE
CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE
PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION,
YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT
SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY
COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS
ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO,
FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT
NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS
WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS
WARRANTIES, WRITTEN OR ORAL. TO THE EXTENT PERMITTED
BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS
NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE
LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS
WARRANTY AS DESCRIBED ABOVE. SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU,
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE.
This warranty applies to product sold in the U.S.A. and Canada only.
Please consult the 'Service Center Search' in the Parts & Service
section of MILWAUKEE's website www.milwaukeetool.com or
call 1.800.SAWDUST (1.800.729.3878) to locate your nearest
MILWAUKEE factory Service Center location.
(1.800.729.3878)
5
SERVICE - CANADA
Milwaukee Tool (Canada) Ltd
1.800.268.4015
Monday-Friday, 7:00 AM - 4:30 PM CST
or visit www.milwaukeetool.ca
LIMITED WARRANTY
USA & CANADA