Kenwood KDC-X720 Mode D'emploi page 30

BLUETOOTH®
RECONNECT ON: The unit automatically reconnect when the last connected
Bluetooth device is within range. ; OFF: Cancels.
AUTO PAIRING ON: The unit automatically pair supported Bluetooth device (iPhone/
iPod touch/Android device) when it is connected through USB input
terminal. Depending on the operating system of the connected device,
this function may not work. ; OFF: Cancels.
INITIALIZE YES: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ; NO: Cancels.
Bluetooth test mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1 Press and hold .
"PLEASE PAIR YOUR PHONE PIN 0000" appears.
2 Search and select this unit model name (KDC-X7**/KDC-BT7**HD/
KMR-D7**BT/KDC-X5**/KDC-BT5**U) on the Bluetooth device.
3 Operate the Bluetooth device to confirm pairing.
"TESTING" flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing status
HF CONNECT: Hands-Free Profile (HFP) compatibility
AUDIO CONNECT: Advanced Audio Distribution Profile (A2DP)
compatibility
PHONEBOOK DL: Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold
26
ENGLISH
to turn off the unit.
BLUETOOTH — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio
devices and switch between these five devices.
Audio player via Bluetooth
1
Press repeatedly (or press SRC on the remote control) to
select BT AUDIO.
2
Operate the Bluetooth audio player to start playback.
To On the faceplate
Playback/pause
Press
Press J / K.
Select group or
folder
Reverse/Forward Press S / T.
skip
Reverse/Fast- Press and hold
S / T.
forward
Repeat play Press
ALL REPEAT, FILE REPEAT,
REPEAT OFF
Random play Press and hold
select ALL RANDOM.
• Press
RANDOM OFF.
On the remote control
. Press .
Press /
Press S /
Press and hold S /
.
repeatedly.
( Not available )
to
( Not available )
to select
.
.