Kenwood KDC-X720 Mode D'emploi page 27

BLUETOOTH®
To On the faceplate
While talking on the first incoming call...
Answer another
Press
incoming call and
hold the current call
Reject another
Press
incoming call
While having two active calls...
End current call and
Press
activate held call
Swap between the
Press
current call and
held call
Adjust the phone Turn the volume knob
volume during a call.
[00] to [35]
• This adjustment will not affect the volume of
(Default: [15])
the other sources.
Switch between
Press
hands-free and
a call.
private talk modes
• Operations may vary
according to the
connected Bluetooth
device.
On the remote control
. Press .
Press .
.
Press .
.
. Press .
Press
.
during
( Not available )
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold
To return to the previous setting item, press
MIC GAIN LEVEL –10 to LEVEL +10 (LEVEL –4): The sensitivity of the
microphone increases as the number increased.
NR LEVEL LEVEL –5 to LEVEL +5 (LEVEL 0): Adjust the noise reduction level
until the least noise is being heard during a phone conversation.
or
ECHO CANCEL LEVEL –5 to LEVEL +5 (LEVEL 0): Adjust the echo cancellation delay
time until the least echo is being heard during a phone conversation.
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2
Turn the volume knob to select an item ( 24), then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold
To return to the previous setting item, press
to exit.
.
to exit.
.
Default: XX
23
ENGLISH