Electrical Connection; Installation Dimensions (Mm) And Ventilation Requirements - AEG SWS74500G0 Manuel D'utilisation

10 www.aeg.com

7.2 Electrical Connection

Caution! Any electrical work
required to install this appliance
should be carried out by a qualified
electrician or competent person.
Warning! This appliance must be
earthed. The manufacturer declines
any liability should these safety
measures not be observed.
Consult a qualified electrician or service
technician if the grounding instructions
are not completely understood, or if
doubt exists as to whether the appliance
is properly grounded.

7.3 Installation dimensions (mm) and ventilation requirements

450
min. 200 cm
450
443
448
5
min. 200 cm
2
Warning! We recommend that you
wait 4 hours before connecting and
installing the appliance to allow the
refrigerant to flow back into the
compressor.
Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your domestic
power supply.
The appliance must be grounded.
The power supply cable plug is provided
with acontact for this purpose.
if the domestic power supply socket is
not grounded, connect the appliance to
a separate ground in compliance with
current regulation.
Consult a qualified electrician.
The airflow behind the appliance must
2
be sufficient.
Make sure that the mains cable can
move freely.