Waste Disposal - Dostmann Electronic ScanTemp 450 Mode D'emploi

GB
6. Trouble shooting
→ 'Low Battery' icon indicates the battery is low.
→ The battery should be replaced with 2x AAA (LR6), 1.5V
batteries immediately.
→ Please check the model with/without this function.
→ Replace the batteries
→ 'Hi' is displayed when the temperature being measured is
outside of the settings of HAL.
→ Please reset the HAL or select target within specifications.
→ 'Lo' is displayed when the temperature being measured is
outside of the settings of LAL.
→ Please reset the LAL or select target within specifications.
→ For all other error messages it is necessary to reset the
ScanTemp 450.
→ To reset the ScanTemp 450, please wait the instrument
automatic off, remove the battery and wait for a minimum of
one minute, reinsert the battery and turn on.
→ If the error message remains please contact the Service‚
Department for further assistance.
14
GB

7. Waste disposal

This product has been manufactured using high-grade materials and components which
can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries
in household waste. As a consumer, you are legally required to
take them to your retail store or to an appropriate collection site
depending on national or local regulations in order to protect the
environment
The symbols for the heavy metals contained are: Cd=cadmium,
Hg = mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste
Electrical and Electronic Equip-ment Directive (WEEE).
Please do not dispose of this instrument in household waste. The
user is obligated to take end-of-life devices to a designated collection
point for the disposal of electrical and electronic equipment, in
order to ensure envi-ronmentally-compatible disposal.
Explanation of symbols
This sign certifies that the product meets the requirements of the EEC
directive and has been tested according to the specified test methods.
8. Specifications:
Measurement range Infrared: -60 .. +500 °C (-76 .. +932 °F)
Temperature range Thermocouple: -64 to +1400 °C (-83.2 to +1999 °F)
Operating environment: 0 .. +50 °C (32 .. 122°F)
Storing conditions: -20 .. +65 °C (-4 .. 149°F)
Response time: 1 second
Optical resolution: 12:1
Emissivity: 0.10~1.00 step 0.01
Mode : MAX, MIN, dIF, AVG, HAL, LAL, PRB, Lock)
Battery life: min 140 hours continuous use
(without laser and backlight).
Dimension: 141 x 134 x 42 mm
Weight: 186 grams including batteries
Note: Subject to change without notice.
For a table of emissivity values of common materials please see page 37/38..
15