For Your Safety; Parts Description - Dostmann Electronic ScanTemp 450 Mode D'emploi

GB

4. For your safety

• The device should only be used as described within these instructions.
• Unauthorized repairs, modifications or changes to the product are prohibited.
Caution! Risk of injury:
• Never point the device towards anyone's eyes.
• Keep this device and the battery out of the reach of children.
• Batteries must not be thrown into a fire, short-circuited,
taken apart or recharged. Risk of explosion!
• Batteries contain harmful acids. Low batteries should be changed
as soon as possible to prevent damage caused by leaking.
• Never use a combination of old and new batteries together,
or batteries of different types. Wear chemical resistant protective gloves and
safety glasses when handling leaking batteries.
• Remove the battery if you do not use the device for a long period of time.
Important information on product safety!
EMC/RFI
• Readings may be affected if the device is operated with in radio frequency
electromagnetic field strength of approximately 3 volts per meter, but the
performance of the instrument will not be permanently affected.
• Do not place your device near extreme temperatures, vibrations or shocks.
• The ScanTemp 450 should be stored at room temperature between
–20 to +65°C.
• The lens should be kept clean at all times.
• The sensor lens is the most delicate part of the ScanTemp. The lens should be
kept clean at all times, care should be taken when cleaning the lens using only a
soft cloth or cotton swab with water or medical alcohol, allowing the lens to fully
dry before using the ScanTemp 450.
• Do not leave the device near objects of high temperature.
10
GB

5. Parts description

Simply aim the ScanTemp450 at the measure target and press the Meas. key 6 to
display the surface temperature.
P1014500096(TN41ALCH_Dostmann)_Laser label Class 3R
50#反銀龍
Font Color: Black
Pantone Yellow C
Pantone Red 032C
1. LCD
2. Up key
3. Down key
4. Mode key
5. Thermocouple socket
6. Measuring key
7. Infrared Lens
8. Laser
9. Battery cover
Default Screen
Infrared function
ScanTemp 450 is supplied with a default emissivity of 0.95.
11