Waste Disposal; Explanation Of Symbols - Dostmann Electronic ScanTemp 410 Mode D'emploi

GB
Trouble Shooting:
• Confirm the unit is power off before.
• Remove the battery for 1 minute, then repower it.
• If the error message does not disappear, contact the retailer for further service
Reminders:
• Not recommended for use in measuring shiny or polished metal
surfaces (stainless steel, aluminum, etc.)
• The unit cannot measure through transparent surfaces such as
glass or plastic. It will measure the surface temperature of the
glass instead.
• Steam, dust, smoke, etc., can prevent accurate measurement by
obstructing the unit's optics.
Care and Cleaning:
• The Sensor Lens is the most delicate part of the thermometer.
Please protect the sensor part from dirt. Gently clean it with a soft
cloth moistened with water or medical alcohol.
• Avoid splashes and spills on the unit.
• Store at a temperature of between -20°C to +65°C.
Specifications:
Temperature range: -60 .. +500 °C (-76 .. +932 °F)
Resolution: 0.1°C from -9.9 ... 199.9°C/F otherwise 1°C/°F
Operating environment: 0 .. +50 °C (32 .. 122°F)
Storing conditions: -20 .. +65 °C (-4 .. 149°F)
Response time: 1 second
Optical resolution: 12:1
Emissivity: 0.95 fixed
Battery life: Minimum 14 hours
Dimension: 174 x 40 x 72 mm
Weight: 180 g (including batteries)
8
GB

Waste disposal:

This product has been manufactured using high-grade materials
and components which can be recycled and reused.
Never dispose of empty batteries and rechargeable
batteries in household waste. As a consumer, you are
legally required to take them to your retail store or to
an appropriate collection site depending on national or
local regulations in order to protect the environment
The symbols for the heavy metals contained
are: Cd=cadmium, Hg = mercury, Pb=lead
This instrument is labelled in accordance with the EU
Waste Electrical and Electronic Equipment Directive
(WEEE). Please do not dispose of this instrument in
household waste. The user is obligated to take end-
of-life devices to a designated collection point for the
disposal of electrical and electronic equipment, in order
to ensure environmentally-compatible disposal.

Explanation of symbols

This sign certifies that the product meets the requirements
of the EEC directive and has been tested according to the
specified test methods.
9