System Connection; Adjustment - Panasonic Gp-Rv700 Mode D'emploi

SYSTEM CONNECTION

BATTERY

ADJUSTMENT

The following adjustment
service personnel or system
The monitor comes with two templates
height between 2 meters (6.6 feet) and 2.8 meters (9.2 feet)
or higher camera position.
Choose the required template, peel off the tape, and fix the
template onto the monitor screen.
Approx. 16 ft (5 m) Line
Approx. 3.3 ft
10
(I m) Line
<Lower Height>
15æ
10k
<Higher Height>
Fuse box
+12V Red
Remote (Blue)
R eve
Switch
(Shift Gear)
To Reverse Light
should be made by qualified
installers.
for use with the
43
MONITOR
9-pin
3 A CONNECTOR
Chassis (GROUND) (Green)
CAMERA
Camera Cable
Select the ON mode by pressing the STD BYION button
1.
on the monitor.
The rearview image is displayed on the monitor screen.
2. Adjust the camera tilt to become the image that the rear
bumper is displayed on the reference line on the moni-
tor screen
Rear
Bumper
o
O
o
Monitor Screen
Reference
Line
7