Major Operating - Panasonic Gp-Rv700 Mode D'emploi

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Front View
2
3
4
0 Mode Selector (STD BYION)
Toggles the operation mode standby and on.
STD BY: No image is on the monitor but the picture
tube is preheated on standby.
The indicator is lit green while this mode is select-
ON: Displays camera images on the monitor.
The indicator is fit amber
ed.
(2) Contrast Control (CONTRAST)
Adjusts the picture contrast. Turn this control clockwise
to increase the picture contrast, and turning the control
counterclockwise has the reverse
@ Brightness Control (BRIGHT)
Adjusts the picture brightness. Turn this control clock-
wise to increase the picture brightness, and turning the
control counterclockwise
@ Audio Control (AUDIO)
Adjusts the volume. Turn this control
increase the volume, and turning
c\ockwise has the reverse
5
while this mode is select-
effect.
has the reverse effect.
clockwise
the control counter-
effect.
Rear View
6
Focus
7
Auto Brightness
This sensor detects
Monitor Fixing Screws
These four screws
monitor can be tilted approximate
ing these screws.
O Mounting Bracket
Installs the monitor
0 Focus Control (FOCUS)
This control is preset at the factory.
@ Remote/Camera Connector (REMOTE/CAMERA)
This 9-pin connector
cable assembly supplied as an accessory for supplying
the power and connecting
to
CAMERA
Control Sensor (ABC)
illumination intensity.
are used to secure the monitor.
30 degrees by loos-
to a vehicle.
is used to connect the remote
the camera.
The
5