Rotex RKRTR Manuel D'installation page 48

4.4. Set-up for EKRTETS as external ambient
temperature sensor
EKRTETS can be used as external ambient temperature sensor
to control the room temperature (instead of the temperature
sensor inside the thermostat). In that case, install the external
temperature sensor where you want to control the ambient
temperature.
To enable the function, set the following codes:
1st 2nd
code code
‚ 
‚ 
This function cannot be combined with floor
NOTE
temperature protection and dew prevention.
4.5. Set-up for radiator applications
Before operation, change the following temperature control
parameter to the required setting for radiator applications.
1st 2nd
code code
‚ 
Installation manual
17
Description
External temperature sensor
EKRTETS installed?
Selection of sensor for
temperature control: use
external ambient temperature
sensor?
Description
Use proportional band control?
Required
setting
ÌlË
ÌlË
Required
setting
!
(=hysteresis)
RKRTR + EKRTETS
Room thermostat
4PW56107-1