Use - FireWare Vesta Mode D'emploi Utilisateurs

User Manual
EN
FireWare Vesta
4.

Use

Gas
The FireWare Vesta can be used with propane or butane. One of the main differences between these
fuels is their boiling point. The boiling point is the transition temperature at which liquid evaporates
to gas. That is why propane and butane requires a minimum temperature for use as fuel for the
FireWare Vesta. Propane and butane are available in steel or plastic cylinders. The most common are
metal propane cylinders. Always use an approved gas cylinder which may be used in accordance with
the standards in your country.
Propane is gaseous at any temperature above approximately -42°C. This makes propane perfectly
suitable as fuel for the FireWare Vesta. Butane has a high boiling point of 0 to 5°C.
Take note: At ambient temperatures around freezing or colder, butane is no longer gaseous and can
no longer be used as fuel for the FireWare Vesta!
Getting starting
1. ALWAYS carry out the following check before you use the FireWare Vesta. If you notice a
deviation during the check, do not use the FireWare Vesta.
Component
Box
Pressure regulator
Flame extinguisher
Operating handle
Gas hose
Gas hose
20
FireWare Vesta
1
Connection extra gas outlet
Activity
Inspect for damage
Inspect for damage
Inspect for damage
Inspect on damage and
smooth bounce-back
Inspect on damage and dry
cracking
Attachment, hose clamps etc.
2 3
Connection charger
Connection gas bottle
Before USE Every 3 months
X
X
X
X
X
X
www.FireWare.nl