Television system
Colour system
Stereo system
Channel coverage
Picture
tube
Audio output
Inputs
Outputs
Power consumption
Dimensions
Weight
Supplied
accessoires
Design and specifications are subject to change without notice.
Disturbances in picture and sound can often be eliminated by checking the symptoms and following the suggestions listed below.
No picture (screen not lit), no sound
• Plug the set into a working outlet.
• Press O on the TV of if the
programme number.
• Check
the aerial.
or no picture (screen not lit) but good sound
• Press the
button on the Remote Commander. Adjust
and
with the ('D + or — button.
• press
Good picture but no sound
• Press
+.
• Disconnect the headphones.
• If
is displayed on the screen, press
6
KV-25 XSD/KV-25
CCIR B, G and H
PAL SECAM
German
WF
UHF channels
Trinitron
114-degree deflection
Approx. 63.5 cm (25 inches)
(Approx. 59 cm picture measured diagonally)
10W + 10W (music power)
21-pin EURO-AV connector. CENELEC Standard
Headphones
External speaker terminals: 2-pin DIN
92Wh:
96 Wh: KV-25 XSTD
Approx. 720 x 506 x 468 mm (w/h/d)
Approx. 37 kg
RM-673 Remote Commander (1)
IEC designation R 6 batteries (2)
indicator
is on, press TV or the
XSTD
system
channels
E 2-S 20
E 21-E69
tube
jack: stereo minijack
KV-25 XSD
No colour for colour programmes
• Press the Ü button on the Remote Commander. Adjust
with the @ + button.
Snow
and
noise
• fine tune the channel manually.
• Check
aerial
connections.
Dotted lines or stripes
This may be caused by local interference (e.g. cars, neon signs,
hairdryers, etc.). Adjust the antenna for minimum interfere nce.
Double images or "ghosts"
This may be caused by reflections from nearby mountains or
buildings. A highly directional outdoor aerial may improve the
picture.