Sony TRINITRON KV-25XSD Notice D'emploi page 3

*PNCTIONS OECONTROLS
On the set
On-screen display
Indicates programme numbers and
Bar display
Indicates the level of z volume,
O contrast, 9: bass, treble and
• Note on function.
When the volume is at the minimum setting the balance
function will not operate.
o power switch
Use O to switch the set on and off. Press this switch, if you
want to cut off the mains power completely.
Note
• To ensure correct operation push the switch in fully.
standby indicator
Lights up brightly when the set is in the standby mode.
• Ifthe main power is tumed offwhen in standby mode. The
standby indicator will take 2 to 6 seconds to go off.
O space sound indicator
Lights up when e on the Remote Commander is pressed.
A/B indicator
One of them lights during bilingual broadcast. (Choose A or
B with the Remote Commander.)
Both light during stereo broadcast. In AV mode, A lights for
left channel, B for right channel, or A and B for both chan-
nels.
Remote control detector
Point the Remote Commander
headphones jack (stereo
Connect only a stereo headphone.
On-screen display AIB indicator
Bar display
input mode.
colour, brightness,
balance.
towards this detector.
minijack)
Remote control
o
detector
o
0
o
c
o
Inside the panel
search buttons
Press to fine tune a weak channel manually, if required.
When (SEARCH) is pressed, the indicator goc off and
the (AFT) circuit does not function on the selected
channel.
To restore the QE (AFT) circuit on this channel, gess QE
(AFT) so that the indicator lights up.
AFT button and indicator
Normally, press (AFD so that the indicator Ights up.
The AFT circuit automatically fine tunes the chmnels for
the best possible picture.
volume buttons
PROGR programme scan buttons
button
• The TV button will not function
o
PROGR
o
o
on this set.
3